|
Robert Michael Shemilt designed this layout, called
Hylton (Town) using standard sectional track to fit in a bookshelf space 64"x9"
(1625x229 mm). It makes an excellent "starter" micro layout -- an easy-to-build,
fun-to-operate introduction to small-space model railroading. A list of sectional
track requirements for several manufacturers is included below. I've also added a
U.S. version using Atlas Snap and Custom Line track pieces.
Robert Michael describes operations at Hylton this way: "The idea of the layout
is a small urban terminus on the end of a short branchline from the main line. Most
goods (freight) traffic is handled at Hylton Junction station (represented by the
hidden Fiddle Siding), where there is a large goods yard. A small amount of goods
traffic is handled here at the Town station, due to a factory located next to the
station (its loading dock is modeled and the rest is depicted on the backscene).
Trains would be mixed if modelled before about 1910, or seperate goods and passenger
afterwards.
"Passenger stock would be compartment stock on such a short service. The station
can accept one 60ft coach along with tank locomotive at any one time. The occasional
mainline corridor coach may make an apperance, having been 'slipped' from a passing
express at the junction.
"On the left of the layout, the headshunt has a small amount of loco facilities
-- a coal stage and a water crane in steam days, so the tank engine can rest here
between dashes to the junction and back. If the line were modelled in the diesel
period, the yard shunter from the junction station would probably work goods wagons
up to the town station, and the passenger service would be provided by a single car
DMU.
"The scenery, as befits an urban area at least in the U.K., is mainly brick
retaining walls and roads. The main overbridge includes a parade of shops on one
side of the road, whilst the station is reached via steps down from another road
(only partly modeled). There is a back scene along all sides except the front, featuring
a typical English semi-industrial landscape (for example Peco SK45 and SK46)."
As only standard turnouts (points) and track sections are used (either Peco or Hornby),
the layout goes together quickly, and scenery can easily be added to this busy bookshelf
line.
And a U.S. version...
Not to leave U.S. modelers out of the fun, I've
redesigned the layout to use standard Atlas Snap and Custom Line track sections.
This version, Milltown, represents the end of a short branch line somewhere
in the Midwest. Scenery is rural -- the industry next to the station could be a grain
elevator or a light manufacturing plant. The Fiddle Siding can disappear into a small
woods, with farmland on the backdrop. If you plan passenger service, it would likely
be provided through the 1950's by a single battered-looking combine or coach attached
to the daily mixed train, and later by an RDC car.
As the Atlas turnouts all have insulated frogs, only two electrical feeder wires
are needed, and they can be attached to the rails anywhere on the layout. Milltown
occupies a 63"x8" (1600x200mm) bookshelf.
In the HO version, the 9:18 a.m. mixed train pulls
into town with one boxcar and an old 60' combine behind the SW7. |
In On30 a Bachmann Porter shoves a coach into the
station track. This layout can work well in narrow gauge!
|
Trackage Required
Hornby: 3x -R600 straight, 8x-R610 1/4 straight, 1x-R603 long straight, 1x-R605
dbl curve 1st rad, 1x-R606 std curve 2nd rad, 1x-R609 dbl curve 3rd rad, 1x-R643
1/2 curve 2nd rad, 1x-R8072 (or R612) L/H point, 1x-R8073 (or R613) R/H point, 1x-R8074
(or R640) L/H curved point, 1x-R8076 (or R632)
Y point.
Peco: 3x -ST200 straight, 8x-ST203 1/4 straight,
2x-ST201 long straight, 1x-ST221 dbl curve 1st rad, 1x-ST225 std curve 2nd rad, 1x-ST231
dbl curve 3rd rad, 1x-ST227 1/2 curve 2nd rad, 1x-ST241 L/H point, 1x-ST240 R/H point,
1x-ST245 L/H curved point, 1x-ST247 Y point.
(Note: you must use ST245, the previous Peco curved point had different dimensions.)
Atlas: 3x-150 9" straight, 1x-152 18"
rad full curve, 1x-153 22" rad full curve, 1x-822 6" straight, 1x-823 3"
straight, 2x-280 Custom Line wye, 1x-281 Custom Line #4L, 1x-282 Custom LIne #4R,
1x-847 Snap or Custom track assortment.
|